Restoration Area > Coin Mech - Free Vend Tips

Is there a way to free vend a Rock Ola without a coin mech

(1/1)

sjnatwork:
Hi,
There's a post in the electrical forum by JB (I can't post a link to it unfortunately - the thread is named "how do i get my machine to dispense free?") which indicates jumping pins 1-3-7 of the Jones connector, but the link to the image with more detail is broken.

When I jump 1-3-7 it works, but only for one can. I must remove the jumper in order to get a second. What is the correct way to jump the pins?

Thanks,
Scott

Farrell:
thats right.  each time you jump is one can.  you need a normally off switch so 1 and 3 are together and 7 to the other side of the switch.  Them when you pres button you get a free vend.

fatstrat:
Ive read the wire jumpn part . It didnt work for me. I think the reason is that I dont have any parts connected to the pin block. no coin changer, time delay, counter,nothing. Is there any way to free dispense w/out these parts?

Navigation

[0] Message Index