Restoration Area > Coin Mech - Free Vend Tips

Wiring Help needed - Vendorlator 125 1/3/7

(1/1)

Isigns:
Hi,

We recently acquired one of these machines and are trying to get it to free vend.

We have wired the push button switch to  1,3,7 lines and have also followed a diagram where we wired it using the wires from the jones plug line itself

It comes on and will cycle when the button is pushed, the problem is it vends all the selections at one time

Its a 5 slot 4 button machine

Wires I have from the jones plug are

Blue , Brown, Green, Red, Yellow, Purple, White

Any help is greatly appreciated
Thanks

Navigation

[0] Message Index