Project # |
3 |
Owner:
|
Jon paquette |
Email |
jpaq@earthlink.net |
Machine: |
Vendo 81 D |
Original Condition |
Good |
Original Purchase Price |
When i was a kid my father had this machine
in his shop. The company he bought it from repainted it
white. When he quit selling soda i brought the machine
home. It's been sitting in my basement ever since. It
was in very good condition when started restoring it.
|
Owned It |
25 Years
|
|
Before
Restoration |
|
After
Restoration |
|
Disassembly
Disassembled the entire machine & spent alot of time just
cleaning it up.
|
|
Sanding Striping
I sanded the cabinet with a d/a sander
|
|
BodyWork
The louvers on one side had been kicked in so i welded it
& used heat to shrink the stretched blades.I ground out any
rust from inside the cabinet & sprayed it with undercoating.
I used body filler to repair any dents.
|
|
MetalWork
I shot the machine with an acrylic primer surfacer & sanded
smooth.
|
|
Painting
I shot the white first (dupont centari 6731A ) then masked
it off and shot 2 coats of red (dupont centari 60807A )
|
|
EmbossingDecals
I cheated on the embossed lettering & used decals from funtronics
with very good results.
|
|
Rubber
Gaskets, Door Seals, just needed a good cleaning.
|
|
Replating
Nothing needed to be replated , I polished the crank handle
and stainless parts.
|
|
Coin Mech
Just needed cleaning . The coin mech was replaced with a
15 Cent mech & I don't feel the need to have the proper mech
so i left alone.
|
|
Cooling System
Cleaned & repainted
|
|
Electrical
I replaced the old wires with new ones.
|
|
Other
|
|
|
|
|
|